Professional protection from the Aussie climate.
Beauty that is more than skin deep. Unlike other leading brands of penetrating oil, Equisol's unique product formula uses an environmentally friendly modified linseed oil base that penetrates into the timber, minimising water uptake while enabling moisture to escape.
Make it last, fast. No peeling. No shine. No fuss.
Equisol Pro365
Pro E365 is a penetrating, non-film forming, clear exterior timber oil that highlights the natural beauty of timber grain with a signature matt finish. It is Australian made timber oil for Australian conditions.
Pro E365 migrates and diffuses into the timber for long lasting protection from within, minimising warping and splitting. The environmentally-friendly linseed oil base is specially formulated with mould and algae inhibitors. Enhanced UV absorbers also help mitigate the effect of sunlight exposure. Use the clear timber oil to allow the natural silvering process, or add a ColourTone for rich colour that lasts longer.
Clean up: Water and detergent
Sizes Available: 1L, 5L, 10L
Coverage:
Softwood: 6-10m2 per litre.
Hardwood: 10-16m2 per litre.
Colourtones
Equisol uses a unique system of architect colour choices that can be purchased and added separately, instead of factory coloured cans. Formulated using micro fine pigments for consistently even colouring, Equisol Colour Tones easily mix with Equisol Pro E365 oil by hand and maintain the natural timber colour character, delay silvering, and retain a natural look for longer.
Clean up: Water and detergent
Sizes Available: 180ml for each 5L of Equisol Pro E365
Equisol Strip
Bring your timber back to life by stripping stubborn old coatings. Suitable for removing film coatings including paint, poly-urethane timber finishes and most solvent based finishes. Also removes old built-up oil coatings. Not suitable for 2Pac or epoxy finishes. Brush on, leave on and then hose off without harsh scraping that can mark your timber. Environmentally friendly and DIY safe with no methylene chloride or NMP solvents.
Where to use:
Exterior timber, metal, masonry and brick.
Sizes Available: 5L, 15L
Mix Ratio: Use undiluted
Coverage: 6-8m2 per litre
Clean up: Water and soap
Equisol Prime
EQUISOL PRIME PREPARES NEW AND UNSEASONED TIMBER FOR COATING OR REMOVES OLD OIL COATINGS
Give your exterior timber the best start with Equisol Prime, a specialised formula that removes tannins, mill glaze and oils to prepare new timber for coating, or removing old oil coatings from existing timber.
Where to use:
Use Equisol Prime on new exterior timber including decking, pergolas, garden furniture, fences, gates, weather boards, trims and soffits. Not suitable for stripping paint or polyurethane film coatings from timber.
Sizes Available: 1L, 4L, 20L
Mix Ratio: 1 part concentrate to 4 parts water
Coverage: 4m2 per litre when diluted
Clean up: Water
Equisol Vitalise
Rejuvenates, cleans and brightens exterior timber before coating.
Equisol Vitalise removes dirt, surface contaminants, grease, rust, iron stains, water stains and old colour tones from existing oiled timber. Rejuvenates grey and weathered timber. Use to prepare exterior timber for recoat.
Where to use:
Exterior timber including decking, pergolas, garden furniture, fences, gates weather boards, trims and soffits. Not suitable for stripping paint or polyurethane film coatings from timber.
Sizes Available: 1L, 4L, 20L
Mix Ratio: 1 part concentrate to 4 parts water
Coverage: 4m2 per litre when diluted
Clean up: Water